Home > Hardware
Sort By:
Page of 1
Galvanized Aircraft Cable for Zip Line Climbing Wall/Rock Wall HAND HOLDS Crosby Wire Rope Clips (Cable Clamps) HG
Galvanized Aircraft Cable is made in accordance with Federal Specification RR-W-410D, meeting the dimensional and strength requirements of MIL-W-83420D. We offer high quality import cable from Korea. Cable is available in a variety of put-ups. Extremely Lightweight and Durable

Come in a variety of colors (you will get a variety mix).

Easy on the fingers Easy Grip Contours

Can be used in a variety of positions

Compatible with lag screws or T-nuts

By purchasing this item you will receive one hand hold in either small, medium, or large. When ordering multiples, we will mix and match colors and sizes for variety.

Compatible with theFlat Face Four faceplate to be removable holds.
One of the most common and safe ways of making a wire rope termination in the field is by using a wire rope clip (aka cable clamp).  For those with a little experience, it is widely held that Crosby┬« Clips (look for the Red-U-Bolt┬«) are the most reliable clips on the market. Not to be confused with the less expensive 'malleable' type of clip, our Wire Rope Clips are constructed of high quality hot dip galvanized, drop forged steel. Available in 3/8" or 1/2".
Detachable Climbing Wall Hold Detachable Climbing Wall Hold  - Face Plate ONLY Eye Bolt 5/8"
Eye Bolt Nut HG 5/8"
Our Price: $5.00
The Association for Challenge Course Technology requires access prevention to limit your liability. Challenge Course Builders recommend removable handholds, such as The Flat Face 4. The Flat Face 4 got its name because the aluminum wall plate attaches to the wall flat, thus preventing un-welcomed climbers. The 4 is there because any hand hold can be used 4 different ways. The Flat Face 4 fits snugly into the stationary base for climbing comfort. At the end of your climbing day, the hand hold is easily removed by your staff.

Can be used with our hand hold or your choice of hand holds. Easily mounted, NO DRILLING REQUIRED.

By purchasing this item you will receive 1 wall plate, and 1 hand hold mount with hand hold attached. Also included are 6 - 2 5/8" or 2 1/2" deck-board screws and washers for mounting the wall plate to your climbing surface.
The Association for Challenge Course Technology requires access prevention to limit your liability. Challenge Course Builders recommend removable hand holds, such as The Flat Face 4. The Flat Face 4 got the name because the aluminum wall plate attaches to the wall flat, thus preventing un-welcomed climbers. The 4 is there because any hand hold can be used 4 different ways. The Flat Face 4 fits snugly into the stationary base for climbing comfort. At the end of your climbing day, the handhold is easily removed by your staff.

Can be used with our hand hold or your choice of hand holds. Easily mounted, NO DRILLING REQUIRED.

By purchasing this item you will receive 1 wall plate, 1 hand hold mount, and 6 - 2 5/8 or 2 1/2 deckboard screws.
Eye Bolts are drop forged steel, machine threaded, heat treated after forging. Eye Bolts are threaded National Course before galvanizing and assembled with hex nuts tapped oversize.
Heavy Duty Thimble Maillon Rapide Quick Link Serving Sleeve HG
Heavy Duty Thimbles
Our Price: $0.45
Serving Sleeve HG
Our Price: $1.80
Heavy Duty Wire Rope Thimbles are constructed of Hot Dip galvanized Steel. They offer longer service life and greater protection against wear and deformation of the wire rope eye. Our Heavy Duty Wire Rope Thimble meets the performance requirements of Federal Specification FF-T-276b Type III, except for those provisions required of the contractor. Rapid Links (aka "Rapides" or "Quick-Links") are steel screw-links designed for fastening lengths of chain together. Canyoneers and climbers use them for constructing anchors, mainly for the "bottom point" of the anchor, where the rope runs. They provide critical connections for trolleys, balay devices, cables and cable hardware. They must be inspected regularly but can last for many years even in the harshest of outdoor environments.

Safe Working Load is a rating system that designates the largest weight that can be hoisted with that link. SWL accounts for some degree of shockloading that is expected in industrial applications. Generally, the breaking strength is five times the SWL.

Maillon Rapide: Quick Link

The big strength of the Maillon Rapide (Quick Link) lies in its effectiveness. Despite their small size, they have a matchless strength, further checked by traction tests during the whole manufacturing process. Safety margin is 5 times the guaranteed working load limit (WLL). These rapid Links are great for use on ropes courses and climbing walls.
Serving sleeves are used in conjunction with wire rope clips and eliminate the time consuming chore of making wire-wound serves. The belled end slips easily over the loose guy strand and a few light taps complete a quick neat serve. No crimping is required. Serving sleeves available in 3 sizes:
3/8" for 5/16" cable
7/16" for 3/8" cable
1/2"
shoulder lag eye screw Standard Wire Rope Thimbles Staples
Staple HG 1/2"
Our Price: $2.90
Our Shoulder Lag Eye Screws are hot dipped galvanized. These Lag Eye Screws are used as an anchor in non-belay devices. Standard Duty Wire Rope Thimbles are constructed of Hot Dip galvanized Steel. Available in 3/8", 1/2", or 5/8". Our Staples are heavy duty, hot galvanized with a rolled diamond point. Staples are available in lengths of 6" or 8".
Swage Sleeve Copper Zinc PlatedSwage Sleeve
Copper Zinc Plated Swage Sleeves for 1/4". 5/16", 3/8", or 1/2" cable. Our Copper Swage Sleeves are capable of supporting the rated breaking strength of the cable when properly applied. Available in Zinc Plated Copper.